Difference between revisions of "Visimage3 Setup for Fiserv Online Clients"
>Johno (→Configuring Stunnel) |
>Johno (→Configuring Stunnel) |
||
| Line 1: | Line 1: | ||
=== Visimage3 Setup === | === Visimage3 Setup === | ||
After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here. | After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here. | ||
| − | === | + | === Stunnel Configuration === |
Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel. | Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel. | ||
Revision as of 23:24, 8 July 2020
Visimage3 Setup
After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.
Stunnel Configuration
Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.
Locate this section:
[VisImage Client] client = yes accept = 30501 connect = 172.21.1.40:30502
- Change the connect IP address from 172.21.1.40 to the correct IP address of your UNIX host and save the file.
- It should not be necessary to modify the accept or connect ports.
- If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.
Visimage3 Server Configuration
When creating a Visimage3 connection, use the following parameters:
| Option | Value |
| Host Address | localhost |
| Host Port | 30501 |
| Host Profile Name | uname!live or uname!eom |
- Where uname is the username assigned by Fiserv. For example, joverton.
- The username is always followed by either !live (for the live databases) or !eom for the end of month (report) databases.
