Difference between revisions of "Visimage3 Setup for Fiserv Online Clients"
>Johno (Created page with "=== Visimage3 Setup === After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. ...") |
>Johno |
||
Line 2: | Line 2: | ||
After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here. | After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here. | ||
=== Configuring Stunnel === | === Configuring Stunnel === | ||
− | Once stunnel has been installed you must edit the stunnel.conf file and | + | Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel. |
Locate this section: | Locate this section: | ||
Line 15: | Line 15: | ||
=== Visimage3 Server Configuration === | === Visimage3 Server Configuration === | ||
When creating a Visimage3 connection, use the following parameters: | When creating a Visimage3 connection, use the following parameters: | ||
+ | {| class="wikitable" style="border-spacing: 2,2,2,2;" | ||
+ | |'''Option''' ||'''Value''' | ||
+ | |- | ||
+ | | Host Address || localhost | ||
+ | |- | ||
+ | | Host Port || 30501 | ||
+ | |- | ||
+ | | Host Profile Name || uname!live or uname!eom | ||
+ | |} | ||
+ | * Where uname is the username assigned by Fiserv. For example, joverton. | ||
+ | * The username is always followed by either '''!live''' (for the live databases) or '''!eom''' for the end of month (report) databases. |
Revision as of 23:17, 8 July 2020
Visimage3 Setup
After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.
Configuring Stunnel
Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.
Locate this section:
[VisImage Client] client = yes accept = 30501 connect = 192.168.1.64:30502
- Modify the connect IP address to match the IP address of your UNIX host and save the file.
- If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.
Visimage3 Server Configuration
When creating a Visimage3 connection, use the following parameters:
Option | Value |
Host Address | localhost |
Host Port | 30501 |
Host Profile Name | uname!live or uname!eom |
- Where uname is the username assigned by Fiserv. For example, joverton.
- The username is always followed by either !live (for the live databases) or !eom for the end of month (report) databases.