Visimage3 Setup for Fiserv Online Clients

From Vital Soft Wiki
Revision as of 23:12, 8 July 2020 by >Johno (Created page with "=== Visimage3 Setup === After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Visimage3 Setup

After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.

Configuring Stunnel

Once stunnel has been installed you must edit the stunnel.conf file and edit the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.

Locate this section: 

[VisImage Client]
client = yes
accept = 30501
connect = 192.168.1.64:30502
  • Modify the connect IP address to match the IP address of your UNIX host and save the file.
  • If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.

Visimage3 Server Configuration

When creating a Visimage3 connection, use the following parameters:

Retrieved from "https://wiki.vital-soft.com/index.php?title=Visimage3_Setup_for_Fiserv_Online_Clients&oldid=2788"