Visimage3 Setup for Fiserv Online Clients

From Vital Soft Wiki
Revision as of 23:17, 8 July 2020 by >Johno
Jump to: navigation, search

Visimage3 Setup

After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.

Configuring Stunnel

Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.

Locate this section: 

[VisImage Client]
client = yes
accept = 30501
connect = 192.168.1.64:30502
  • Modify the connect IP address to match the IP address of your UNIX host and save the file.
  • If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.

Visimage3 Server Configuration

When creating a Visimage3 connection, use the following parameters:

Option Value
Host Address localhost
Host Port 30501
Host Profile Name uname!live or uname!eom
  • Where uname is the username assigned by Fiserv. For example, joverton.
  • The username is always followed by either !live (for the live databases) or !eom for the end of month (report) databases.
Retrieved from "https://wiki.vital-soft.com/index.php?title=Visimage3_Setup_for_Fiserv_Online_Clients&oldid=2789"