Visimage3 Setup for Fiserv Online Clients

Visimage3 Setup

After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.

Stunnel Configuration

Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.

Locate this section:

[VisImage Client]
client = yes
accept = 30501
connect = 172.21.1.40:30502

• Change the connect IP address from 172.21.1.40 to the correct IP address of your UNIX host and save the file.
• It should not be necessary to modify the accept or connect ports.
• If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.

Visimage3 Server Configuration

When creating a Visimage3 connection, use the following parameters:

Option	Value
Host Address	localhost
Host Port	30501
Host Profile Name	uname!live or uname!eom

• Where uname is the username assigned by Fiserv. For example, joverton.
• The username is always followed by either !live (for the live databases) or !eom for the end of month (report) databases.