Difference between revisions of "Visimage3 Setup for Fiserv Online Clients"

From Vital Soft Wiki
Jump to: navigation, search
>Johno
(Visimage3 Setup)
>Johno
Line 12: Line 12:
 
connect = 172.21.1.40:30502
 
connect = 172.21.1.40:30502
 
</pre>
 
</pre>
* Change the connect IP address from 172.21.1.40 to the correct IP address of your UNIX host and save the file.
+
*Note that 172.21.1.40 is just a sample IP address, your specific address will most liely be different.
 +
*Change the connect IP address from 172.21.1.40 to the correct IP address of your UNIX host and save the file.
 
*It should not be necessary to modify the accept or connect ports.
 
*It should not be necessary to modify the accept or connect ports.
 
*If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.
 
*If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.

Revision as of 20:21, 5 August 2020

Visimage3 Setup

After installing Visimage3, Fiserv Online Clients must also install stunnel which is used to encrypt all communication between Visimage3 and the host. A special Fiserv installation of stunnel can be downloaded here.

Stunnel Configuration

Once stunnel has been installed you must edit the stunnel.conf file and modify the [Visimage Client] section. By default, the stunnel.conf file is located in C:\Program Files\stunnel.

Locate this section:

[VisImage Client]
client = yes
accept = 30501
connect = 172.21.1.40:30502
  • Note that 172.21.1.40 is just a sample IP address, your specific address will most liely be different.
  • Change the connect IP address from 172.21.1.40 to the correct IP address of your UNIX host and save the file.
  • It should not be necessary to modify the accept or connect ports.
  • If you have already rebooted your PC since installing stunnel, stop and restart the stunnel service. Otherwise reboot.

Visimage3 Server Configuration

When creating a Visimage3 connection, use the following parameters:

Option Value
Host Address localhost
Host Port 30501
Host Profile Name uname!live or uname!eom
  • Where uname is the username assigned by Fiserv. For example, joverton.
  • The username is always followed by either !live (for the live databases) or !eom for the end of month (report) databases.