V17 UNIX Configuration Changes

From Vital Soft Wiki
Revision as of 20:34, 13 April 2016 by >Johno
Jump to: navigation, search

Vital Signs 1.7 - UNIX Configuration Changes

Depending on the version of Vital Signs currently installed, some of these changes may have already been made.

Custom Extract Code

In revision 1942 (Jan 2016) a new option was added to the host MBRSHLN job to extract custom files.

The custom code is added to VSLOAD-CUSTOM (scripts) and a new macro is required to enable/disable the custom call.

  • Edit the host macro definition file: /ASKPLUS/vsdata/custom/live/vsmacdef
  • Near the beginning of the file, you will see these 3 lines:
(Your VS-CUSTOM-ATTR-XEQ will be set to 0 or 1 - do not change the value.)
  ** The following Macro should be set to 1 if custom attribute code is to be used for this client. 
  ** Custom code is added to /ASKPLUS/vsdata/scripts/VSCALC-CUSTOM-ATTR 
  Macro VS-CUSTOM-ATTR-XEQ = 0 
  • Add the following lines, after the above section, to create the VS-CUSTOM-LOAD-XEQ macro:
(Set the macro value to 0 unless you are adding a custom extract.)
  ** The following Macro should be set to 1 if custom extract code is to be used for this client. 
  ** Custom code is added to /ASKPLUS/vsdata/scripts/VSCALC-CUSTOM
  Macro VS-CUSTOM-LOAD-XEQ = 0
  • The file should now look like this:
  ** The following Macro should be set to 1 if custom attribute code is to be used for this client. 
  ** Custom code is added to /ASKPLUS/vsdata/scripts/VSCALC-CUSTOM-ATTR 
  Macro VS-CUSTOM-ATTR-XEQ = 0 
  ** The following Macro should be set to 1 if custom extract code is to be used for this client. 
  ** Custom code is added to /ASKPLUS/vsdata/scripts/VSCALC-CUSTOM
  Macro VS-CUSTOM-LOAD-XEQ = 0